Table of Contents
Advertisement
Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility. Please contact techni-
cal support or your sales representative for latest BIOS file and the firmware update utility.
For instructions on how to update BIOS with the flash utility, please see
Knowledge/Video/31
from the Knowledge Base of the DFI website.
R
Read file successfully. (path= "platform.ini")
Insyde H20FFT (Flash Firmware Tool) Version (SEG) 100.00.08.10
Copyright(c) 2012 - 2016, Insyde Software Corp. All Rights Reserved.
Current BIOS Model name: EC90A
New BIOS Model name: B189.10A
Current BIOS version: B188.20A
New BIOS version: B189.10A
0%
C:\EC90A>_
Chapter 7 BIOS Setup
https://www.dfi.com/
Information
Please do not remove the AC power
|
|
Initializing
Updating Block at FFFFF000h
25%
50%
75%
100%
100%
Chapter 7
Notice: BIOS SPI ROM
1. The Intel
Management Engine has already been integrated into this system board. Due to
®
safety concerns, the BIOS (SPI ROM) chip cannot be removed from this system board and
used on another system board of the same model.
2. The BIOS (SPI ROM) on this system board must be the original equipment from the factory
and cannot be used to replace one which has been utilized on other system boards.
3. If you do not follow the methods above, the Intel
updated and will cease to be effective.
Note:
a. You can take advantage of flash tools to update the default configuration of the
BIOS (SPI ROM) to the latest version anytime.
b. When the BIOS IC needs to be replaced, you have to populate it properly onto the
system board after the EEPROM programmer has been burned and follow the
technical person's instructions to confirm that the MAC address should be burned
or not.
33
Management Engine will not be
®
|
|
Advertisement
Table of Contents
