Table of Contents
Advertisement
Super I/O
This section configures the system super I/O chip parameters.
COM Port 1
Enable or disable a serial port.
Disable Disable this serial port.
Enable
Enable this serial port.
It also shows the Base I/O address and the assigned interrupt number.
Type
Choose RS232, RS422 or RS485 (Peer-to-Peer) for the serial communication type for
COM port 1.
WDT
Enable or disable the watchdog function. A counter will appear if you select to enable
WDT. Input any value between 1 and 255 (seconds).
Chapter 7 BIOS Setup
Chapter 7
PC Health Status
This section displays PC health status.
29
Advertisement
Table of Contents
