Procedure To Install The Sim - Teldat Regesta Lite AU Installation Manual

3 Components and Power Supply
Location of the SK1 and SK2 SIM trays
Fig. 15:

3.6.2 Procedure to install the SIM

In order to insert a SIM card in a tray, locate the retaining flange (fastening with OPEN and LOCK on it) so you can
open the tray and place the SIM card inside. The steps are as follows:
Inserting the SIM in the internal tray
Fig. 16:
16
(1) Push the fastening in the direction indicated by the arrow with the word
OPEN.
(2) Open the upper part of the tray.
(3) Fully insert the SIM card using the guides.
(4) Return the tray to its original position
(5) While pressing on the tray, push the fastening towards the word LOCK until
it is firmly in place.
Teldat S.A.
Regesta Lite AU