Performing an update
((Only possible when a corresponding file (*.hex) is on the USB stick)
• Connect the USB stick, the Data exchange menu is displayed.
• Select Software update, enter password and press OK to confirm. The update is performed automatically; follow
the display dialogue.
Reading in parameters
(Only possible when a corresponding file (*.csv) is on the USB stick)
• Connect the USB stick, the Data exchange menu is displayed.
• Select Read in parameter, enter password and press OK to confirm. The read-in process is performed
automatically.
7.4.3
Leading out the USB connection
To enable access to the USB connection on the circuit board without opening the housing, a USB housing port
with cable and plug can be ordered from KESSEL for installation in the control unit housing (see 5.1)..
7.4.4
Menüstruktur Expertenmodus
3.9
Expert mode
Note: KESSEL is a registered company name in most countries. Aqualift is a registered trademark or a trademark
in most countries.
2018/06
APPENDIX
3.9.1
Power-up delay
3.9.2
Alternating operation
3.9.3
Battery monitoring
3.9.4
Automatic alarm acknowledgement
67/68