1.
General
1.1.
Introduction and welcome
We are delighted that you have decided to purchase one of our products. It is sure to satisfy your requirements to
the full. We wish you a problem-free and successful installation.
In our efforts to maintain our quality standard at the highest possible level, we are naturally dependent on your
support. Please let us know any possible ways to improve our products.
Do you have any questions? We shall be glad to hear from you.
1.2.
Product description, general
The Aqualift control unit provides the control for a lifting station for wastewater with or without sewage. The swit-
ching signals from the sensors for the wastewater level are processed electronically. Either a level switch or a
pressure sensor may be used as the level detector. Pumping is activated once the filling volume is reached. Either
one or two wastewater pumps are then switched on, depending on the version. Pumping stops when the level has
fallen again to a suitable degree.
If two wastewater pumps are connected, they are activated either individually or together depending on the filling
volume and the positioning of the level sensors.
1.2.1
Versions
The Aqualift Comfort control unit is produced in the following versions:
Aqualift Comfort 230V Mono
Aqualift Comfort 230V Duo
GENERAL
Connection for one wastewater pump
Connections for two wastewater pumps
38/68
2018/06