Time Counter (Excel Web / Excel Web Ii); Timer Value (Excel Web / Excel Web Ii); Truncate (Excel Web / Excel Web Ii) - Honeywell EXCEL 5000 User Manual

ALPHABETIC REFERENCE
I/O Dialog Box
Internal Parameters
I/O Dialog Box
Internal Parameters
I/O Dialog Box
Internal Parameters
74-5577–33 (US)
EN2B-0184 GE51 R0518 (Europe)
Function Counts the runtime when the input signal X is greater than or equal to 1. If the
counter reset signal Rst is greater than or equal to 1, the runtime is reset to 0.
Inputs Two inputs where:
X = input signal (>= 1 →start counting runtime)
Rst = reset signal (>= 1 → reset runtime to 0)
Outputs Two outputs where:
Hr on = runtime in hours
Min on = runtime in minutes
None.
Function Legacy RACL function "RTIM": Counts the time in seconds. Can be reset by the
"Reset Timer" function.
Outputs One analog output (T). Timer value in sec.
None.
Function Truncates the decimal places, e.g. 3.1 becomes 3, -3.1 becomes -3)
Input One analog input (X).
Output One analog output (Y).
None.

Time Counter (Excel Web / Excel Web II)

Timer Value (Excel Web / Excel Web II)

Truncate (Excel Web / Excel Web II)

228
EXCEL CARE CONTROL ICONS