Honeywell EXCEL 5000 User Manual page 93

EXCEL CARE CONTROL ICONS
XFM 35 Internal Parameters
Parameter
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
The XFM 35 internal parameters dialog box lists parameters that control program
functions. Later sections describe how to use these parameters depending on
operation desired. The table following the dialog box summarizes parameter types,
functions, default values, setting range, and engineering units. (The dialog box
values and engineering units are not necessarily the defaults.)
Type
Display Moment_Power_Cons (current power
consumption)
Display Remaining_Rest_Tim(e) (not for Sliding Window)
Display Remaining_Work (not for Sliding Window)
Display Possible_Power (with constant power
consumption)
Comm. Max(imum)_Switch_On_P(ower)
Comm. Safety_Margin
Comm. Hysteresis_Switch (for power)
Comm. Test( Board )/Param(eter)_ Change (Set to 1
when changing any other parameter)
Comm. Measurem_Procedure (algorithm type: 1 = Sliding
Window; 2 = Ideal Curve; 3 = Extrapolation)
Comm. Measurement_Interv(al/window size)
Comm. Freeze_Time (not for sliding window)
Comm. Switch-On_Wait_Tim(e)
Comm. (Power) Limit_1 (for ID___Tariff=0)
Comm. (Power) Limit_2 (for ID___Tariff=1)
Progr. Prio/Rotat(0/1)_P1 (sequential or rotational load
shed method for priority 1 groups) Sequential=0
Progr. Prio/Rotat(0/1)_P1 (sequential or rotational load
shed method for priority 2 groups) Sequential=0
Brief Description
95
ALPHABETIC REFERENCE
Setting Default
Range Value Unit
none none
none none min
none none kWh
none none
1-1000 10
0-1000 0
0-1000 0.5
0/1/2/3 2 Integer
1/2/3 3 Integer
1-7200 15 min
30-300 180 sec
0-240 120 sec
0-10 6 10000
0-10 6 10000
0 or 1 0 Integer
0 or 1 0 Integer
74-5577–33 (US)
EN2B-0184 GE51 R0518 (Europe)
kW
kW
kW
kW
kW
kW
kW