Read / Ria - Honeywell EXCEL 5000 User Manual

EXCEL CARE CONTROL ICONS
Internal parameters
Initial Dialog Box
Attribute Selection Dialog Box
Outputs Valid: Indication if a value is set for the datapoint (TRUE) or not (FALSE)
Value: The value read from the priority (Valid is TRUE) or the default value from
the parameter (Valid is FALSE)
"Default value if priority is not set": The value of this parameter is written to the
output ´Value` if the priority has no value.
Function Read one to five attributes for a user address and make these values available as
inputs to other control icons or hardware/software points.
The RIA icon displays the following dialog box when you first place the icon in the
work space and click it. Select the point you want to read from and then connect it to
the ADR input in the RIA box.
Input Any point (ADR).
After you connect an input to ADR, the Attribute Selection dialog box displays.
Select the desired attributes. You must select at least one attribute. See the
Attributes Table for a list of which attributes are available for each point type.
1. Select desired attributes by clicking the down arrow to display options and then
clicking desired attribute.
Click OK to save selections and close the dialog box. (Cancel closes the dialog
box without saving selections.)
RESULT
2. Click the RIA icon to display the secondary RIA I/O dialog box.
The dialog box closes. The control strategy work space displays.
211
ALPHABETIC REFERENCE

Read / RIA

74-5577–33 (US)
EN2B-0184 GE51 R0518 (Europe)