Control Icon Table (Excel Web / Excel Web Ii) - Honeywell EXCEL 5000 User Manual

INTRODUCTION
Function Name
Absolute
Addition
ADH2
AND
Arcus Cosinus
Arcus Sinus
Arcus Tangems
Average
CAS Plus
Compare2
Comparison
Cosinus
Counter
Cycle
Decimal Places
Delay
Dewpoint
74-5577–33 (US)
EN2B-0184 GE51 R0518 (Europe)
This chapter lists icons alphabetically by function name and includes function
names, the previous function name, in which folder it can be found, and short
descriptions. Function name is usually the same as the icon name.
Previous Function name
Add
ADH2
AVR
Cascade controller
(Excel Web II with OS
3.01.00 or higher only)
Cyclic timer

Control Icon Table (Excel Web / Excel Web II)

Folder
Arithmetic Returns the absolute value.
Arithmetic Sum up the input values.
Legacy XL500 Legacy RACL function: Adapts the slope S of
the heating curve for the determination of the
flow temperature setpoint to the building
characteristics.
Logic AND output becomes TRUE(1) if all inputs
are TRUE(1). NAND output is the inverted
AND output.
Arithmetic Calculates the arcus cosinus function of X.
Arithmetic Calculates the arcus sinus function of X.
Arithmetic Calculates the arcus tangens function of X.
Arithmetic Calculates the average of input values.
Controller Cascade controller that acts as a PI
controller with a master and cascade
controller.
Comparison Compares two analog inputs (A and B).
Comparison Compares input A and B.
Arithmetic Calculate the cosinus function of X in rad.
Misc Increments the output Y by 1 when input "X"
changes from 0 to 1. The counter is set to 0,
when "Reset" input becomes TRUE (1).
Timer Outputs an alternating value.
Arithmetic Returns the decimal places value of the input
(3.175 => 0.175).
Misc Switch-on delay of input A to Y. if input "A" is
unequal to "B" within delay time, then Alarm
output = TRUE (1).
Misc Calculates the dewpoint temperature from
the absolute humidity.
14
EXCEL CARE CONTROL ICONS
Description