Time Zones - Honeywell ACC 50 Installation Instructions Manual

Installation Instructions ACC 50
12.

Time zones

Timer
Time zone A
Card 1
Card 3
Time zone memory A
The access rights can be distributed over two time zones.
In the above example, card 1 is only authorized in time zone A and card 2 only in time zone B.
Card 3 on the other hand, is authorized in both time zones.
When authorizing a card, the ACC 50 stores the same in the time zone memory which is currently
activated due to the switch position.
A card which requires authorizing for both time zones, must therefore, be authorized twice, i.e.
when the switch is open and closed.
Memory requirements:
Switch open
= time zone A
For both time zones together, the maximum number of cards
remains limited to 99.
Timer
Switch closed
= time zone B
Time zone A
Card 2
Card 3
Time zone memory B
29