Honeywell EXCEL 5000 User Manual page 16

INTRODUCTION
Function Name
Sinus
Split
Square root
Subtraction
Switching Table
Time Counter
Timer Value
Truncate
Tuncos
Value Ramp
Value Ramp2
WIDO
Write Global
Reg.
Write Priority
X root Y
X^2
X^Y
XOR Table
ZEB
74-5577–33 (US)
EN2B-0184 GE51 R0518 (Europe)
Previous Function name
Minus
RTIM
(Excel Web II with OS
3.00.00 or higher only)
(Excel Web II with OS
3.00.00 or higher only)
(Excel Web II with OS
3.00.00 or higher only)
Zero Energy Band
Folder
Arithmetic Calculate the sinus function of X in rad.
Misc Splits the input into multiple outputs. Result
for a split into 3 outputs: Y3 = (((X-Y1) / P1) -
Y2) / P2) modulo P3.
Arithmetic Calculates the square root.
Arithmetic Subtracts the sum of S inputs from the input
value M.
Logic Switching logic module
Timer Counts the runtime of the input signal.
Timer Legacy RACL function "RTIM": Counts the
time in seconds. Can be reset by the "Reset
Timer" function.
Arithmetic Truncates the decimal places (3.1 => 3, -3.1
=> -3).
Misc Provides time until next change of state
information from schedule for the connected
input.
Misc Defines the slope by which the output will
follow the input.
Misc Defines the slope by which the output will
follow the input.
Legacy XL500 Legacy RACL function: Checks if the input
value is within the range between minimum
and maximum.
Misc Writes a value to a global register.
Misc Write the value of an input with a defined
priority to an output which must be connected
with the present value of a datapoint.
Arithmetic Calculates X to the root of Y.
Arithmetic Calculates X * X.
Arithmetic Calculates X to the power of Y.
Logic XOR output becomes TRUE (1) if exactly
one input is TRUE(1). XNOR output is the
inverted XOR output.
Energy management Divides a specified range into Heating range,
Zero energy band and Cooling range.
18
EXCEL CARE CONTROL ICONS
Description