Honeywell EXCEL 5000 User Manual page 15

EXCEL CARE CONTROL ICONS
Function Name
Odd Parity
On-Board DI
On-Board DO
On/Off Delay
OR
PID
PID Plus
POL
Ramp
Random
Read Global
Req.
Read Priority
Read Priority
Value
Reset Timer
Round
Round down
Round up
RS flip-flop
SET
Sequence
Previous Function name
PID controller
PID controller
POLYNOMIAL
(Excel Web II with OS
3.00.00 or higher only)
(Excel Web II with OS
3.01.00 or higher only)
(Excel Web II with OS
3.02.00 or higher only)
SET
Folder
Logic Compares binary values and returns TRUE
(1), if the number of TRUE (1) elements are
odd.
Misc Read on-board digital input.
Misc Write on-board digital output.
Timer Switch On- and Off delay of input A to output
Y.
Logic OR output becomes TRUE(1) if at least one
input is TRUE(1). NOR output is the inverted
OR output.
Legacy XL500 Legacy RACL function: PID-Controller that
generates a signal depending on the
deviation of the controlled variable from the
reference variable.
Controller PID-Controller that generates a signal
depending on the deviation of the controlled
variable from the reference variable.
Legacy XL500 Legacy RACL function: Calculates the
polynomial.
Misc Calculates the output value in relation to the
input, depending on a pre-defined graph.
Misc Returns a random value in a range between
lower and upper limit.
Misc Reads values from global registers
Misc Returns the value of the highest valid priority
in the priority array
Misc Reads the selected priority of the datapoint
Timer Resets the timer of a "Timer value" function.
Arithmetic Rounds the input value to the next integer
value.
Arithmetic Rounds the input value down to the next
integer value (3.1 => 3, -3.1 => -4).
Arithmetic Rounds the input value up to the next integer
value (3.1 => 4, -3.1 => -3).
Misc Sets the output to TRUE(1) if the "SET" input
is TRUE(1) until the "RESET" input becomes
TRUE(1).
Legacy XL500 Legacy RACL function: Set the output
depending on the comparison of the inputs.
Y=FALSE(0) if A < B Y=TRUE(1) if A > B Y is
not changed if A = B.
Misc Calculates three output values in relation to
the input, depending on pre-defined graphs.
17
INTRODUCTION
Description
74-5577–33 (US)
EN2B-0184 GE51 R0518 (Europe)