Preparations Before Filling; Filling The Machine; Pre-Rinse - Wexiodisk WD-PRM6 Installation And User Manual

Pre-rinse machine
Table of Contents

Advertisement

Operating instructions

4.1.2 Preparations before filling

Check:

4.1.3 Filling the machine

NB: The dishwasher must be started. When the dishwasher is started, both the
machines are filled with water at the same time.

4.2 Pre-rinse

WD-PRM6 & WD-PRM7
That the machine and removable parts have been cleaned. If not – clean
them!
That there is no dirt in the nozzles of the wash arms (6)
That removable parts are correctly in place
That the drain lever (10) is turned to the left as far as it will go
That the power switch is in the ON position
Press the 0/1 button (8) to switch on the power.
The light in the pushbutton (8) lights up green when the machine is filled
and blue when pre-washing.
During operation the machine's tank fills automatically.
For optimum results, it is essential to keep the filters (2) clean. Remove the
filters and rinse regularly.
23
Rev. 5.0 (201902)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-prm7

Table of Contents