Operating instructions
4.3.2 Emptying
4.3.3 Daily cleaning
Machines without a drain pump
•
Press the 0/1 button (8).
•
Empty the tanks in WD-PRM6/7 and the connected dishwasher by turning
the drain lever (10) to the middle position (downwards).
Machines with a drain pump
•
Press the 0/1 button (8).
•
Turn the drain lever (10) to one of the drain positions (downwards or to the
right).
•
See the manual for the dishwasher connected.
Internally
Clean the filters (2, 5). Check the wash arms' (6) nozzles (7); clean if necessary.
Rinse out all of the machine's inside surfaces and clean the tank.
Externally
Wipe the outside of the machine with a soft, damp cloth.
•
If detergent is used, it must not contain abrasives. Detergents containing
abrasives will damage the stainless steel panels.
•
The exterior of the machine must not be hosed. Water can enter the ma-
chine and damage the control panel and electrical equipment.
WD-PRM6 & WD-PRM7
27
Rev. 5.0 (201902)