Table of Contents
Advertisement
Installation instructions
3.6 Installation and connection of auxiliary equipment and options
•
•
The various options normally place no specific requirement on the installation.
3.6.1 Sinks
The sinks must be hooked firmly onto the top edge of the tank.
The connection profile must look like the one shown in the drawing. The distance
of 6 mm may be reduced, but must not be less than 3 mm.
Use a spirit level to check that the sinks are horizontal and adjust the height, if
necessary.
Detail of sink cover
WD-PRM6 & WD-PRM7
Once the machine is in place and has been adjusted horizontally and ver-
tically, the auxiliary equipment can be fitted.
The machine can be equipped with a number of options. Check what your
machine is equipped with, which depends on the model, machine type and
country.
6
300730_R1a
16
Rev. 5.0 (201902)
Advertisement
Table of Contents
