Service Manual
H1 Bent Axis Motors, Size 060/080/110/160/210/250 cm3
Minor repair
Replace speed sensor
62 |
©
Danfoss | August 2018
Removal
1. Using a 5 mm internal hex wrench, remove screw (J0020).
2. Remove speed sensor (J0010).
3. Discard O-ring (J0010A).
Assembly
Speed sensor assembly
J0020
5 mm
8 N•m [6 lbf•ft]
J0010
J0010A
1. Lubricate and install new O-ring (J0010A).
2. Install speed sensor (J0010).
3. Install screw (J0020) using a 5 mm internal hex wrench with torque to 8 N•m [6 lbf•ft].
AX00000025en-US0504