Danfoss H1B 060 Service Manual page 57

Service Manual
H1 Bent Axis Motors, Size 060/080/110/160/210/250 cm3
Minor repair
© Danfoss | August 2018
9. Lubricate and install shuttle (C0025).
10. Using a 1/4 inch internal hex wrench, install four plugs (C0050). Torque to 40 N•m [30 lbf•ft].
11. Using a 1/8 inch internal hex wrench, install three plugs (C0060). Torque to 8 N•m [6 lbf•ft].
AX00000025en-US0504 | 57