Hydraulic Proportional Actuator Replacement - Danfoss H1B 060 Service Manual

Service Manual
H1 Bent Axis Motors, Size 060/080/110/160/210/250 cm3
Minor repair

Hydraulic proportional actuator replacement

© Danfoss | August 2018
Removal
1. Remove three cap screws (B0050) using a 4 mm internal hex wrench.
2. Remove the actuator (B0010).
Inspection
Clean and inspect all machined surfaces for damage or wear. Replace parts if necessary.
Assembly
Replacing actuator
B0050
B0010
P108828
1. Install cap screws (B0050) using a 4 mm internal hex wrench and torque screws to 6 N•m [4 lbf•ft].
2. Test the motor for proper operation.
AX00000025en-US0504 | 43