Danfoss H1B 060 Service Manual page 67

Service Manual
H1 Bent Axis Motors, Size 060/080/110/160/210/250 cm3
Torque chart
© Danfoss | August 2018
Plug size and torque chart (continued)
Item O-ring plug
F0100 9/16 - 18UNF
F0150 (060)
1-1/16 - 12 UN (Radial endcap)
F0150 (080, 110,
160, 210, 250)
G0050 5/16 - 24UNF (SAE and DIN flange)
7/16 - 20UNF (Cartridge only/not shown)
G0055
G0060 (060, 080) 7/8 - 14UN
G0060 (110, 160) 1-1/16 - 12UN
1-5/16 - 12UN
G0060 (210, 250)
K0030 M18 - 1.5
L00** M18 - 1.5
9/16-18 UNF (Axial endcap, not shown)
F0160
Wrench size Torque
1/4 internal hex 40 N•m [30 lbf•ft]
95 N•m [70 lbf•ft]
9/16 internal hex
115 N•m [85 lbf•ft]
1/8 internal hex 8 N•m [5 lbf•ft]
3/16 internal hex 8 N•m [5 lbf•ft]
3/8 internal hex 70 N•m [52 lbf•lb]
9/16 internal hex 70 N•m [52 lbf•lb]
5/8 internal hex 70 N•m [52 lbf•lb]
24 mm hex 67 N•m [49 lbf•ft]
24 mm hex 67 N•m [49 lbf•ft]
1/4 internal hex 40 N•m [30 lbf•ft]
AX00000025en-US0504 | 67