Delivery Recommendations - ST STM32091C-EVAL User Manual

UM1817
1.4

Delivery recommendations

Before using the board for the first time, verify that nothing was damaged during shipment
and that no components are unplugged or lost.
When the board is extracted from its plastic bag, check that no component remains in the
bag.
The main components to verify are:
1. The 8 MHz crystal (X2) which may have been removed from its socket by a shock.
2. The MicroSD card which may have been ejected from the CN8 connector (right side of
the board).
3. The dual-interface EEPROM board (ANT7-M24LR-A) which may have been unplugged
from the CN2 connector (top left corner of the board).
For all information concerning the version of the MCU used on the board, its specification
and possible related limitations, visit the ST web site to download relevant data sheet and
errata sheet.
DocID026902 Rev 2
Overview
7/58
57