Cisco ASA Series Cli Configuration Manual page 211

Chapter 1 Managing Feature Licenses
Monitoring the Shared License
To monitor the shared license, enter one of the following commands.
Command
show shared license [detail | client
[hostname] | backup]
show activation-key
show vpn-sessiondb
Examples
The following is sample output from the show shared license command on the license participant:
hostname>
Primary License Server : 10.3.32.20
Version
Status
Shared license utilization:
SSLVPN:
This device:
Messages Tx/Rx/Error:
The following is sample output from the show shared license detail command on the license server:
hostname>
Backup License Server Info:
Device ID
Address
Registered
HA peer ID
Registered
Messages Tx/Rx/Error:
Shared license utilization:
SSLVPN:
Purpose
Shows shared license statistics. Optional keywords ar available only for
the licensing server: the detail keyword shows statistics per participant.
To limit the display to one participant, use the client keyword. The
backup keyword shows information about the backup server.
To clear the shared license statistics, enter the clear shared license
command.
Shows the licenses installed on the ASA. The show version command
also shows license information.
Shows license information about VPN sessions.
show shared license
: 1
: Inactive
Total for network :
Available :
Utilized :
Platform limit :
Current usage :
High usage :
Registration : 0 / 0 / 0
Get : 0 / 0 / 0
Release : 0 / 0 / 0
Transfer : 0 / 0 / 0
show shared license detail
: ABCD
: 10.1.1.2
: NO
: EFGH
: NO
Hello : 0 / 0 / 0
Sync : 0 / 0 / 0
Update : 0 / 0 / 0
Total for network :
5000
5000
0
250
0
0
500
Cisco ASA Series CLI Configuration Guide
Monitoring Licenses
1-49