Cisco ASA Series Cli Configuration Manual page 125

Chapter 1 Getting Started
This mode does not support the following:
•
Saving changes made to the configuration that appear in the GUI.
•
File or disk operations.
•
Historical monitoring data.
•
Non-administrative users.
•
These features:
–
–
–
–
–
•
Operations that cause a rereading of the configuration, in which the GUI reverts to the original
configuration:
–
–
–
–
To run ASDM in Demo Mode, perform the following steps:
Step 1
Download the ASDM Demo Mode installer, asdm-demo-version.msi, from the following location:
http://www.cisco.com/cisco/web/download/index.html.
Step 2
Double-click the installer to install the software.
Step 3
Double-click the Cisco ASDM Launcher shortcut on your desktop, or open it from the Start menu.
Step 4
Check the Run in Demo Mode check box.
The Demo Mode window appears.
File menu:
Save Running Configuration to Flash
Save Running Configuration to TFTP Server
Save Running Configuration to Standby Unit
Save Internal Log Buffer to Flash
Clear Internal Log Buffer
Tools menu:
Command Line Interface
Ping
File Management
Update Software
File Transfer
Upload Image from Local PC
System Reload
Toolbar/Status bar > Save
Configuration > Interface > Edit Interface > Renew DHCP Lease
Configuring a standby device after failover
Switching contexts
Making changes in the Interface pane
NAT pane changes
Clock pane changes
Cisco ASA Series CLI Configuration Guide
Starting ASDM
1-17