Cisco ASA Series Cli Configuration Manual page 1541

Chapter 1 Configuring the ASA CSC Module
What to Do Next
See the
Monitoring the CSC SSM
To check the status of a module, enter one of the following commands:
Command
show module
show module 1 details
show module 1 recover
Examples
The following is sample output from the show module command for an ASA with a CSC SSM installed:
hostname# show module
Mod Card Type
--- -------------------------------------------- ------------------ -----------
0 ASA 5520 Adaptive Security Appliance
1 ASA 5500 Series Content Security Services Mo ASA-SSM-CSC-10
Mod SSM Application Name
--- ------------------------------ ---------------- --------------------------
1 CSC SSM
The following is sample output from the show module details command, which provides additional
information about an ASA with a CSC SSM installed:
hostname# show module 1 details
Getting details from the Service Module, please wait...
ASA 5500 Series Security Services Module-20
Model: ASA-SSM-20
Hardware version: 1.0
Serial Number: JAF10333331
Firmware version: 1.0(10)0
Software version: Trend Micro InterScan Security Module Version 6.2
App. name: Trend Micro InterScan Security Module
App. version: Version 6.2
Data plane Status: Up
Status: Up
HTTP Service: Up
Mail Service: Up
FTP Service: Up
Activated: Yes
Mgmt IP addr: 209.165.200.225
Mgmt web port: 8443
The following is sample output from the show module recover command, which includes recovery
details for an ASA with a CSC SSM installed:
hostname# show module 1 recover
Module 1 recover parameters. . .
Boot Recovery Image: Yes
Image URL: tftp://10.21.18.1/ids-oldimg
Port IP Address: 209.165.200.230
"Monitoring the CSC SSM" section on page
Purpose
Displays the status.
Displays additional status information.
Displays the network parameters for transferring an image to the module.
1-13.
Model
ASA5520
Status SSM Application Version
Down 6.2.1599.0
Cisco ASA Series CLI Configuration Guide
Monitoring the CSC SSM
Serial No.
JMX1241L05S
AF1234BQQL
1-13