Repair Instructions; To Clean And Examine The Product Parts; To Replace A Trimmer Line Cutter; To Replace The Trimmer Head - Husqvarna 536LiL Workshop Manual

5.1 To clean and examine the product parts

• Clean and examine all parts fully. You find more
instructions in the chapter for each part if special
tools or procedures are necessary.
• Replace damaged or defective parts.
• Always use original spare parts.

5.2 To replace a trimmer line cutter

Always replace a worn trimmer line cutter with a new
one.
1. Remove the 2 screws and replace the trimmer line
cutter.
737 - 002 - 25.10.2018

5 Repair instructions

5.3 To replace the trimmer head

Note: To increase the life and quality of the trimmer line
soak it in water for 1-2 days.
1. Push the clips on the trimmer head and remove the
2. Pull out the line chute assembly.
3. Remove the nut that holds the trimmer head and the
4. Replace the trimmer head.
5. Install the nut.
6. Install the line chute assembly.
7. Install the trimmer head.
trimmer head and trimmer line.
drive disc.
Repair instructions - 19