Repair Instructions; General Repair Instructions; Dismantling The Motor - Husqvarna 536LiL Workshop Manual

9.1 General repair instructions

WARNING!
The battery must always be removed
for service/repair work and may only
be replaced once the trimmer has
been completely assembled again!

9.2 Dismantling the motor

1
Disassemble the trimmer head (A). Loosen the nut
(B). Lifting the plate for the trimmer head (A).
See figure 1.
2
Dismantle the trimmer guard.
See "Dismantling the trimmer guard".
3
Dismantle the operating handle (LiL).
Dismantle the wear guard (LiR).
Refer to "Basic dismantle/assembly".
4
Dismantle the wear guard under the battery housing.
Refer to "Basic dismantle/assembly".
5
Dismantle the battery housing.
Refer to "Basic dismantle/assembly".
6
For products with S/N: -2015080000 (536LiL),
-2015100000 (536LiR).
Disconnect the wires (A, gray), (B, black) and
(C, red) from the motor and extract them from the
EMC filter (D).
See Figure 2a.
For products with S/N: 2015080001- (536LiL,
536LiLX), 20151000001- (536LiR, 536LiRX).
Disconnect the wires (A, gray), (B, black) and
(C, red) from the motor and extract them from
the EMC filter (D).
See figure 2b.

9 Repair Instructions

NOTE!
Note how wires, components, etc., are posi-
tioned before dismantling.
Make sure to position them correctly to avoid
pinching when the trimmer is reassembled.
A
Fig 1
A
B
C
Fig 2a
A
B
C
Fig 2b
Repair Instructions
A
A
A
B
D
D
– 39
English