Husqvarna 536LiL Workshop Manual page 38

b) LiR, LiRX/iRX
c) LiLX/iLX US from S/N 20182500300
3. Clean and examine all parts fully. There is more
instructions in the chapter for each part if special
tools or procedures are necessary.
4. Replace damaged or defective parts.
5. Always use original spare parts.
LiC, iC, LiL, LiLX, iLX
5.20.2 To assemble the power trigger lockout
and power trigger
1. Assemble the power trigger and power trigger
lockout on the handle. Make sure that the spring
blade comes below the keypad.
38 - Repair instructions
LiR, LiRX, iRX LiLX, iLX US
a) LiL, LiLX/iLX, LiC/iC
b) LiR, LiRX/iRX
c) LiLX/iLX US from S/N 20182500300
2. Assemble the operating handle. See
the operating handle on page 37 .
To assemble
737 - 002 - 25.10.2018