Husqvarna 536LiL Workshop Manual page 33

11. Put the cable in the wear guard and assemble the
handle arm.
12. Put the control cable on to the clip and wear guard.
5.15.2.2 For products with S/N: LiR, LiRX/iRX
201510000-:
1. Put the bottom section of the cable in the battery
housing and connect the connector to the control
unit.
2. Assemble the battery housing. See
battery housing on page 37 .
3. Assemble the wear guard below the battery housing.
To disassemble the wear guard on page 21 .
See
737 - 002 - 25.10.2018
4. Assemble the keypad. Connect the cable to the
5. Put the cable in the operating handle and connect
6. Assemble the power trigger lock and power trigger.
7. Assemble the operating handle. See
To assemble the
main switch, put the parts in the operating handle.
the 2 cable holders with the 4 screws.
To assemble the power trigger lockout and
See
power trigger on page 38 .
the operating handle on page 37 .
To assemble
Repair instructions - 33