Wear Guard For The Battery Housing - Husqvarna 536LiL Workshop Manual

5.16.4 To assemble the trimmer guard LiC/iC
1. Move the trimmer guard (C) down the shaft. Move
the trimmer head onto the shaft and attach it with the
screw (D). Connect the connector (E).
C
2. Put the trimmer guard on the motor housing.
36 - Repair instructions
3. Attach the motor cover (B) with the 4 screws (A).
D
E

5.17 Wear guard for the battery housing

5.17.1 To remove the wear guard from the
battery housing
1. Remove the 6 screws and remove the wear guard.
B
A
737 - 002 - 25.10.2018