Fan - Husqvarna 536LiL Workshop Manual

5.13.2.2 For products with S/N: LiL, LiLX
2015080000-, LiR, LiRX/iRX 201510000-:
1. Attach the cables from the motor to the control unit
with (A, grey), (B, black) and (C, red).
2. Attach the connector (D) to the control unit for the
keypad, the fan and the main switch.
D
3. Put all the components in the battery housing.
Attach the 2 screws to the control unit (G) and the 2
screws to the battery connector (H).
4. Assemble the battery housing. See
battery housing on page 37 .
5. Assemble the wear guard below the battery housing.
To disassemble the wear guard on page 21 .
See
6. Assemble the operating handle. See
handle on page 37 .
737 - 002 - 25.10.2018
A
B
C
G
H
H
G
To assemble the
Operating

5.14 Fan

5.14.1 To replace the fan
5.14.1.1 For products with S/N: LiL -2015080000, LiR
-2015100000:
1. For products with S/N: LiL -2015080000
a) Connect the red wire from the battery contact to
the main switch.
2. For products with S/N: LiR -2015100000
a) Connect the red wire from the control cables to
the battery connector.
3. Connect the cables from the motor to the control unit
with (A, grey), (B, black) and (C, red).
4. Attach the yellow cable (D) to the control unit.
5. Attach the connector (E) to the keypad.
6. Attach the connector (F) to the fan.
F
A
B
C
7. Apply grease to the connector surface.
E
D
Repair instructions - 29