Repair Instructions; Product Overview For Repair Instructions; To Clean And Examine The Product Parts; To Install The Loop Handle - Husqvarna 325L Workshop Manual

6.1 Product overview for repair instructions

8
9
1. Starter cover
2. Muffler
3. Flywheel
4. Ignition module
5. Clutch assembly
6. Fuel tank
7. Carburetor
8. Clutch cover
9. Heat shield
10. Air box cover
11. Throttle handle
12. Loop handle
13. Gearbox
14. Clutch drum

6.2 To clean and examine the product parts

• Clean and examine all parts fully. You find more
instructions in the chapter for each part if special
tools or procedures are necessary.
• Replace damaged or defective parts.
• Always use original spare parts.
1023 - 001 - 24.04.2019

6 Repair instructions

1
2
3
4
5
14
6
13
10
7
12

6.3 To install the loop handle

1. Put the loop handle between the arrows on the
shaft.
2. Tighten the bolt to attach the loop handle to the
shaft.
11
Repair instructions - 11