Husqvarna 536LiL Workshop Manual page 47

6.12.4 Troubleshooting of the battery connector
6.12.4.1 To disassemble the battery connector
CAUTION: The pin in the connector of the
communication cable is loose and can fall out.
1. Remove the battery connector.
2. Push out the pins with a screwdriver.
3. Pull out the wires and connectors to the positive and
negative terminals.
737 - 002 - 25.10.2018
4. Lift the plastic fastener and pull out the
communication cable, if installed.
Troubleshooting - 47