Husqvarna gas hedge trimmer operator's manual (22 pages)
Summary of Contents for Husqvarna 136LiC
Operator′s manual 136LiC Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. E E E E n n n n g g g g l l l l i i i i s s s s h h h h...
KEY TO SYMBOLS Symbols on the machine: Arrows which show limits for handle Translation of the original Swedish operating instruction. positioning. WARNING! Trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or Do not expose to rain.
KEY TO SYMBOLS Symbols in the operator’s You will ﬁnd the following labels on your lawn trimmer, battery and battery charger: manual: The machine is turned on and off by pressing the on and stop button. Always remove the battery to prevent the machine being started by accident.
CONTENTS Contents Note the following before starting: KEY TO SYMBOLS Symbols on the machine: ........2 Please read the operator's manual carefully. Symbols on the battery and/or on the battery charger: ..............2 WARNING! Long-term exposure to noise Symbols in the operator’s manual: ......3 can result in permanent hearing impairment.
Congratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River, for production of muskets.
WHAT IS WHAT? What is what? Trimmer head 11 Operator′s manual Cutting attachment guard 12 Handle adjustment Shaft 13 Battery indicator button Loop handle 14 Battery status Power trigger 15 Warning indicator Keypad 16 SavE button Power trigger lockout 17 Activate and deactivate button Battery 18 Power on and warning indicator Cord...
GENERAL SAFETY PRECAUTIONS General power tool safety • Store the equipment in a lockable area so that it is out of reach of children and unauthorized persons. warnings • Keep hands and feet away from the cutting area at all times and especially when switching on the motor.
Only use Husqvarna original batteries for Husqvarna Wear hearing protection that provides adequate noise products and only charge them in an original battery reduction. charger from Husqvarna. The batteries are software encrypted. Use only a Husqvarna original BLi battery in your machine. 8 – English...
Li-ion Li-ion Li-ion The rechargeable Husqvarna batteries, BLi, are Only use Chargers, Husqvarna QC, for charging the exclusively used as a power supply for the relevant Husqvarna replacement batteries, BLi. Husqvarna cordless appliances. To avoid injury, the battery must not be used as a power source for other devices.
GENERAL SAFETY PRECAUTIONS Do not charge: Keypad • non-rechargeable batteries in the battery charger or Make sure the machine is switched on or off when the use them in the machine. activate/deactivate button (1) is pressed and held (>1 sec.). The green LED (2) is lit or turned off. •...
GENERAL SAFETY PRECAUTIONS Make sure the power trigger is locked when the power WARNING! Never use a cutting trigger lock is in its original position. attachment without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is ﬁtted this can cause serious personal injury.
GENERAL SAFETY PRECAUTIONS Trimmer head WARNING! Always use recommended trimmer line. See technical data. Failure to follow this instruction may cause personal injury. IMPORTANT! Always ensure the trimmer line is wound tightly and evenly around the drum, otherwise the machine will generate harmful vibration.
ASSEMBLY Fitting the loop handle Li-ion Li-ion • Fit the screw into the loop handle. • Slide the clamp into the slot in the loop handle. • Fit the wing nut. • Now adjust the trimmer to give a comfortable working position.
BATTERY HANDLING Battery status The battery must be charged before using it the ﬁrst time. The battery is only 30% charged when delivered. The display shows the battery capacity and if there are • Put the battery in the battery charger. Make sure that any problems with the battery.
BATTERY HANDLING Transport and storage Disposal of the battery, battery charger and machine Li-ion Li-ion Symbols on the product or its packaging indicate that this product cannot be handled as domestic waste. It must instead be submitted to an appropriate recycling station •...
Connect battery to the machine Make sure to use fully charged batteries. Use only a Husqvarna original battery in your machine. See technical data. • Insert the battery in the machine. The battery should slide easily into the battery holder on the machine.
WORKING TECHNIQUES General working instructions Safety instructions while working • Make sure you can move and stand safely. Check the IMPORTANT! area around you for possible obstacles (roots, rocks, branches, ditches, etc.) in case you have to move This section takes up the basic safety precautions for suddenly.
WORKING TECHNIQUES • Release the power trigger after each working trigger after each working operation to save battery operation to save battery power. power. WARNING! Neither the operator of the machine nor anyone else may attempt to remove the cut material while the motor is running or the cutting attachment is rotating, as this can result in serious injury.
WORKING TECHNIQUES Clearing • The clearing technique removes all unwanted vegetation. Keep the trimmer head just above the ground and tilt it. Let the end of the cord strike the ground around trees, posts, statues and the like. CAUTION! This technique increases the wear on the cord.
MAINTENANCE Inspection and maintenance Trimmer line Check the line by threading it into the hole on the cover, as shown in the illustration. Li-ion Li-ion WARNING! Always remove the battery before any maintenance on the machine. IMPORTANT! Never clean the battery or the battery charger with water.
MAINTENANCE Troubleshooting schedule Troubleshooting takes place from the keypad. Keypad Control panel Possible faults Possible action The power trigger and the activate Release the power trigger and the button are pressed at the same machine is active. time. The trimmerhead is jammed. Error LED ﬂashes.
MAINTENANCE Maintenance schedule Li-ion Li-ion WARNING! Always remove the battery before any maintenance on the machine. The following is a list of the maintenance steps that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator's Manual.
) at handles, measured according to EN 11806 and ISO 22867, m/s Equipped with trimmer head (original), left/right 1,9/1,3 Use only a Husqvarna original BLi battery in your machine. Approved chargers for the speciﬁed batteries, BLi. Battery charger QC120 QC330...
EC Declaration of Conformity (Applies to Europe only) We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the lawn trimmer Husqvarna 136 LiC with serial numbers dating from 2012 onwards (the year is clearly stated on the rating plate, followed by the serial number), comply with the requirements of the COUNCIL’S DIRECTIVE:...
T25B Li-ion Li-ion 6,0 m 10 cm 4" 3,05 m "Clic" 15 cm 6"...