Uninstall; Power Source; External Power Source - Teldat V Installation Manual

Uninstall

To remove the device, simply remove it from the slot where it was inserted. See figure 10.

Power Source

The Teldat V router is powered though an external AC/DC.
The equipment must be used with the power supply provided by manufacturer, or
equivalent.
W
orkplace Conditions. Main Characteristics
• Avoid humid and or dusty locations.
• Direct exposure to sunlight should be avoided as well as other heat sources. The device
should not be placed amongst papers, magazines or other elements that could hinder
natural air circulation.
• The device should not be placed very close to strong electromagnetic fields such as
speakers, engines, etc.
• Knocks and/or strong vibrations should be avoided during transport, operation and
storage.
WARNING: Electric supply current for telephone and communication cables is dangerous.
To prevent electric shock while installing, moving or opening the device covers, cables
should be "Connecting" and "Disconnect" as explained in the sections on this.

External Power Source

F 10. USB
IGURE MODEM INSERTION SLOT
TELDAT V
– Installation Manual
I - 13
Doc.DM567-I
Rev.4.0