Dentsply Sirona
Installation Instructions Sinius / Sinius CS / Sinius TS
63 22 627 D3561
D3561.031.01.15.02 07.2018
4.20
Connecting the instrument hoses
4.20.1
SINIUS dentist element
Fit the instrument hoses (according to order) from the left to the right.
Observe the anti-twist protection on the hose couplings.
1. Fit the hose for SPRAYVIT M and screw it tight.
2. Fit the handpiece hoses for the turbine and motor and screw them
tight.
3. Fit the hose for SIROSONIC TL and screw it tight.
4. Plug the video camera into the bottom of the dentist element.
5. Insert the corresponding handpieces.
A ball stopper for an unoccupied instrument holder comes with the dentist
element. Insert the ball stopper in an unassigned instrument holder. This
prevents accidental deposit of an instrument in this holder.
4.20.2
SINIUS CS dentist element
Fit the instrument hoses (according to order) from the left to the right.
Observe the anti-twist protection on the hose couplings.
Opening the dentist element
1. Remove the rubber liner from the instrument holder.
2. Press the outer projections of the instrument holder upward and
remove it.
Connecting the instrument hoses
1. Fit the hose for SPRAYVIT M and screw it tight.
2. Fit the handpiece hoses for the turbine and motor and screw them
tight.
3. Fit the hose for SIROSONIC TL and screw it tight.
4. Attach the video camera.
5. Unlatch the brackets of the upper reel holders from the catch
mechanism and open them.
6. Insert the hoses through the reel holder of the respective swivel arm.
4 Installation
4.20 Connecting the instrument hoses
125