4 Installation
4.15 Installing the LEDview operating light
74
4.15
Installing the LEDview operating light
4.15.1
Installing the support tube
4.15.1.1
Standard installation
1. Loosen the plug connection (E).
2. Remove the panel (F).
3. Insert the support column (A) into the support sleeve (D) up to the
stop. Ensure that the pin (B) is in the groove (C).
CAUTION
Operational reliability
To ensure safe and error-free operation of the connected devices, the
pin (B) must not be removed from the support column (A) and must be
positioned in the groove (C).
Installation Instructions Sinius / Sinius CS / Sinius TS
D3561.031.01.15.02 07.2018
Dentsply Sirona
63 22 627 D3561