Installing Heliodent Plus On The Support Tube For The Operating Light; Scope Of Delivery; Install The Support Column (If You Have Not Done It Already) - Dentsply Sirona Sinius Installation Instructions Manual

Dentsply Sirona
Installation Instructions Sinius / Sinius CS / Sinius TS
A Support arm for assembly to light assembly rod
B Scissor arm (attached to the X-ray tube unit)
C X-ray tube unit
D Wall adapter
E
Radiator cable L1 for HELIODENT
model / unit model
Consists of radiator cable and ground conductor.
Attached to the X-ray tube unit.
63 22 627 D3561
D3561.031.01.15.02 07.2018
4.19 Installing HELIODENT Plus on the support tube for the operating light
4.19
Installing HELIODENT Plus on the support tube
for the operating light
4.19.1

Scope of delivery

PLUS
ceiling
4.19.2

Install the support column (if you have not done it already)

Explanation
If a treatment center is mounted without a treatment light (with and
without monitor), then there is an individually shortened support column
for Heliodent installation.
This shortened support column must be installed.
F Covers for support arm and scissor arm
G Installation material for the wall adapter
H Installation kit for the manual switch
I Connecting box
J
Radiator cable L7 for HELIODENT
model / unit model
Consists of radiator cable and ground conductor.
Establishes a connection between the wall
adapter and connecting box in the treatment
center.
Length 10 m
4 Installation
PLUS
ceiling
111