Intercom Control As Viewed By Internal User - 2N Helios IP Verso Installation Manual

3.4 Intercom Control as Viewed by Internal User

Call Answering
You can answer the incoming calls to the
phone like any other calls. You can unlock the door, activate/deactivate a user/profile
via your phone keypad during the call. The calls, however, are time-limited to avoid
unintentional blocking of the
duration in the
Configuration Manual). Press # on your phone anytime to extend the call time. The
automatic call termination is signalled with a short beep 10s before the call end.
Calling to 2N
®
2N Helios IP Verso allows you to answer incoming calls. Set the required
parameters in the Incoming calls group; refer to the Miscellaneous subsection in the
Configuration Manual.
Door Opening (Switch Activation) by Code
®
2N Helios IP Verso is equipped with a door unlocking switch. Enter the valid code
(refer to the Miscellaneous subsection in the Configuration Manual) using your phone
keypad to activate this switch.
Procedure:
Enter the switch 1 or 2 activating code using your phone keypad and press * for
confirmation. Confirmation is unnecessary if the
enabled, refer to the Miscellaneous subsection in the Configuration Manual.
A valid code is signalled by the
.
User Activation/Deactivation
Activate/deactivate a user using your phone in order to route calls directly to the phone
numbers assigned to the user, refer to the Miscellaneous subsection in the
Configuration Manual for details.
Procedure:
Enter the user activating/deactivating code using your phone keypad and press * for
confirmation.
A valid code is signalled by the
signalled by the
®
2N TELEKOMUNIKACE a.s., www.2n.cz
2N
Call time limit
®
Helios IP Verso
sound.
®
2N Helios IP Verso
®
Helios IP Verso
(refer to the Miscellaneous subsection in the
Lock code without confirmation
sound. An invalid code is signalled by the
or according to the code type. An invalid code is
intercom using your
line. Set the maximum call
is
sound
100