Gain Settings; Alarm Ranges - Cytek Biosciences Aurora User Manual

Gain Settings

The amount of signal amplification applied to each detector channel can be modulated by
increasing or decreasing the amount of gain applied. The gains for every detector channel can be
saved and are collectively known as the user settings. User gain settings are stored as a ratio
against the Daily QC. Every time Daily QC is performed, User Settings will be adjusted accordingly.

Alarm Ranges

You can set an alarm to warn you when the gain and %rCV exceeds the passing criteria that you
define. This changes the outliers (shown in red) in the LJ graphs. Select Alarm Range from the
Cytometer QC tab, then adjust the SD range (plus or minus) for individual detectors for each laser.
30 Aurora User's Guide