Default Settings - Cisco MDS 9000 Series Configuration Manual

Default Settings

2004 Feb 25 23:22:37 vegas6 %PORT-5-IF_UP: %$VSAN 75: 2004 Wed Feb 25 21:05:43.
...
Default Settings
Table 24: Default FICON Settings , on page 298
Table 24: Default FICON Settings
Parameters
FICON feature
Port numbers
FC ID last byte value
EBCDIC format option
Switch offline state
Mainframe users
Clock in each VSAN
Host clock control
SNMP users
Port address
Prohibited ports
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
298
lists the default settings for FICON features.
Default
Disabled.
Same as port addresses.
0 (zero).
US-Canada.
Hosts are allowed to move the switch to an offline state.
Allowed to configure FICON parameters on Cisco MDS switches.
Same as the switch hardware clock.
Allows host to set the clock on this switch.
Configure FICON parameters.
Not blocked
Ports90–253 and 255 for the Cisco MDS 9200 Series switches.
Ports250–253 and 255 for the Cisco MDS 9500 Series switches.
Configuring FICON