Displaying Control Unit Information; Displaying Ficon Information; Receiving Ficon Alerts - Cisco MDS 9000 Series Configuration Manual

Displaying Control Unit Information

Displaying Control Unit Information
Displays Control Unit Information, on page 290
Displays Control Unit Information
switch# show ficon control-device sb3
Control Unit Image:0x80b9c2c
VSAN:20 CU:0x20fe00 CUI:0 CUD:0 CURLP:(nil)
ASYNC LP:(nil) MODE:1 STATE:1 CQ LEN:0 MAX:0
PRIMARY LP:
ALTERNATE LP: VSAN:0 CH:0x0 CHI:0 CU:0x0 CUI:0
Logical Path:0x80b9fb4
VSAN:20 CH:0x200600 CHI:15 CU:0x20fe00 CUI:0 STATE:1 FLAGS:0x1
LINK: OH:0x0 OC:0x0 IH:0x0 IC:0x0
DEV:
SENSE: 00 00 00 00 00 00 00 46
IUI:0x0 DHF:0x0 CCW:0x0 TOKEN:0x0 PCCW:0x0 FCCW:0x0 PTOKEN:0x0 FTOKEN:0x0
CMD:0x0 CCW_FLAGS:0x0 CCW_COUNT:0 CMD_FLAGS:0x0 PRIO:0x0 DATA_COUNT:0
STATUS:0x0 FLAGS:0x0 PARAM:0x0 QTP:0x0 DTP:0x0
CQ LEN:0 MAX:0 DESTATUS:0x0

Displaying FICON Information

This section includes the following topics:

Receiving FICON Alerts

In Displays Configured FICON Information, on page
you will receive an alert to indicate any changes in the FICON configuration.
Displays Configured FICON Information
switch# show ficon
Ficon information for VSAN 20
Ficon is online
VSAN is active
Host port control is Enabled
Host offline control is Enabled
User alert mode is Enabled
SNMP port control is Enabled
Host set director timestamp is Enabled
Active=Saved is Disabled
Number of implemented ports are 250
Key Counter is 73723
FCID last byte is 0
Date/Time is set by host to Sun Jun 26 00:04:06.991999 1904
Device allegiance is locked by Host
Codepage is us-canada
Saved configuration files
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
290
VSAN:0 CH:0x0 CHI:0 CU:0x0 CUI:0
OH:0x0 OC:0x0 IH:0x0 IC:0x0
30 20 00 00 00 00 00 00
00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
displays configured control device information.
290, the user alert mode is Enabled output confirms that
Configuring FICON