Displaying Dpvm Configurations - Cisco MDS 9000 Series Configuration Manual

Creating Dynamic VSANs
Command
switch#
switch(config)#
switch(config)#
switch(config)#
This example shows the conflicts in DPVM databases merge:
switch# show dpvm merge status
Last Merge Time Stamp
Last Merge State
Last Merge Result
Last Merge Failure Reason : DPVM DB conflict found during merge [cfs_status: 76] Last Merge
Failure Details: DPVM merge failed due to database conflict
Local Switch WWN
Remote Switch WWN
--------------------------------------------------------------------------
--------------------------------------------------------------------------
dev-alias dpvm_dev_alias_1 [21:00:00:04:cf:cf:45:ba]
dev-alias dpvm_dev_alias_2 [21:00:00:04:cf:cf:45:bb]
dev-alias dpvm_dev_alias_3 [21:00:00:04:cf:cf:45:bc]
[Total 3 conflict(s)]
rbadri-excal13#
This example shows the conflicts in DDAS mode:
switch# show dpvm merge status
Last Merge Time Stamp
Last Merge State
Last Merge Result
Last Merge Failure Reason : DPVM DB conflict found during merge [cfs_status: 76] Last Merge
Failure Details: DPVM merge failed due to DDAS mode conflict
Local Switch WWN
Remote Switch WWN
Local DDAS mode
Remote DDAS mode

Displaying DPVM Configurations

Use the show dpvm command to display information about WWNs configured on a per VSAN basis (see the
following examples).
Displays the DPVM Configuration Status
switch# show dpvm status
DB is activated successfully, auto-learn is on
show dpvm merge statistics
clear dpvm merge statistics
: Fri Aug
: Fail
: Fail
: 20:00:00:0d:ec:24:e5:00
: 20:00:00:0d:ec:09:d5:c0
Conflicting DPVM member(s)
: Fri Aug
: Fail
: Fail
: 20:00:00:0d:ec:24:e5:00
: 20:00:00:0d:ec:09:d5:c0
: Basic
: Enhanced
Purpose
Displays the DPVM databases merge statistics.
Clears the DPVM databases merge statistics.
8 15:46:36 2008
Loc VSAN
1313
1313
1313
8 15:46:36 2008
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x

Displaying DPVM Configurations

Rem VSAN
1414
1414
1414
31