Cloning Zones, Zone Sets, Fc Aliases, And Zone Attribute Groups Using Fabric Manager - Cisco MDS 9000 Series Configuration Manual

Configuring and Managing Zones
Enters configuration mode.
Step 2
switch(config)# zoneset clone oldname newnamevsan 2
Clones a zoneset in the specified VSAN.
Step 3
switch(config)# zone clone oldname newname vsan 2
Clones a zone in the specified VSAN.
Step 4 switch(config)# fcalias clone oldname newnamevsan 2
Clones a fcalias in the specified VSAN.
Step 5
switch(config)# zone-attribute-group clone oldname newname vsan 2
Clones a zone attribute group in the specified VSAN.
Step 6 switch(config)# zoneset activate name newname vsan 2
Activates the zoneset and updates the new zone name in the active zoneset.
Cloning Zones, Zone Sets, FC Aliases, and Zone Attribute Groups Using Fabric
Manager
To clone a zone, zone set, fcalias, or zone attribute group, follow these steps:
Step 1 Choose Zone > Edit Local Full Zone Database.
You see the Select VSAN dialog box.
Step 2
Select a VSAN and click OK.
You see the Edit Local Full Zone Database dialog box for the selected VSAN.
Step 3 Choose Edit > Clone.
You see the Clone Zoneset dialog box (see
word Clone followed by the original name.
Figure 37: Clone Zoneset Dialog Box
Step 4
Change the name for the cloned entry.
Step 5 Click OK to save the new clone.

Cloning Zones, Zone Sets, FC Aliases, and Zone Attribute Groups Using Fabric Manager

Figure 37: Clone Zoneset Dialog Box, on page
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
87). The default name is the
87