Cisco MDS 9000 Series Configuration Manual page 272

Cisco MDS-Supported FICON Features
.
• Unified storage management—Cisco MDS 9000 FICON-enabled switches are fully IBM CUP standard
compliant for in-band management using the IBM S/A OS/390 I/O operations console. See the
In-Band Management, on page
• Port address-based configurations—Configure port name, blocked or unblocked state, and the prohibit
connectivity attributes can be configured on the ports. See the
• You can display the following information:
• Individual Fibre Channel ports, such as the port name, port number, Fibre Channel address,
• Nodes attached to ports.
• Port performance and statistics.
• Configuration files—Store and apply configuration files. See the
279.
• FICON and Open Systems Management Server features if installed. —See the
FCP Mixing, on page
• Enhanced cascading support—See the
• Date and time—Set the date and time on the switch. See the
, on page
• Configure SNMP trap recipients and community names—See the
Parameters, on page
• Call Home configurations—Configure the director name, location, description, and contact person. Refer
to the Cisco MDS 9000 Family NX-OS System Management Configuration Guide.
• Configure preferred domain ID, FC ID persistence, and principal switch priority—For information about
configuring domain parameters, refer to the Cisco MDS 9000 Family NX-OS System Management
Configuration Guide .
• Sophisticated SPAN diagnostics—The Cisco MDS 9000 Family provides industry-first intelligent
diagnostics, protocol decoding, and network analysis tools as well as integrated Call Home capability
for added reliability, faster problem resolution, and reduced service costs. For information about monitoring
network traffic using SPAN, refer to the Cisco MDS 9000 Family NX-OS System Management
Configuration Guide
• Configure R_A_TOV, E_D_TOV— See the
• Director-level maintenance tasks—Perform maintenance tasks for the director including maintaining
firmware levels, accessing the director logs, and collecting data to support failure analysis. For information
about monitoring system processes and logs refer to the Cisco MDS 9000 Family NX-OS System
Management Configuration Guide
• Port-level incident alerts—Display and clear port-level incident alerts. See the
on page
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
250
289.
operational state, type of port, and login data.
248.
266.
267.
278.
Configuring FICON Ports, on page
FICON Configuration Files, on page
CUP In-Band Management, on page
Allowing the Host to Control the Timestamp
Configuring SNMP Control of FICON
Cisco MDS-Supported FICON
Configuring FICON
CUP
269.
VSANs for FICON and
289.
Features.
Clearing RLIR Information,