Cisco MDS 9000 Series Configuration Manual page 337

Advanced Features and Concepts
<--------------------
verify mode
loadbalancing:src-id/dst-id/oxid
operational state:up
Step 5
Use the show fcdomain vsan command to verify the domain ID.
switch# show fcdomain vsan 1
The local switch is a Subordinated Switch.
Local switch run time information:
State: Stable
Local switch WWN:
Running fabric name: 10:00:00:60:69:22:32:91
Running priority: 128
Current domain ID: 0x64(100)
<---------------
verify domain id
Local switch configuration information:
State: Enabled
Auto-reconfiguration: Disabled
Contiguous-allocation: Disabled
Configured fabric name: 41:6e:64:69:61:6d:6f:21
Configured priority: 128
Configured domain ID: 0x64(100) (preferred)
Principal switch run time information:
Running priority: 2
Interface
----------------
fc2/1
fc2/2
fc2/7
----------------
Step 6
Use the show fcdomain domain-list vsan command to verify the local principal switch status.
switch# show fcdomain domain-list vsan 1
Number of domains: 5
Domain ID
--------- -----------------------
0x61(97) 10:00:00:60:69:50:0c:fe
0x62(98) 20:01:00:05:30:00:47:9f
0x63(99) 10:00:00:60:69:c0:0c:1d
0x64(100) 20:01:00:05:30:00:51:1f [Local]
0x65(101) 10:00:00:60:69:22:32:91 [Principal]
--------- -----------------------
Step 7
Use the show fspf internal route vsan command to verify the next hop and destination for the switch.
switch# show fspf internal route vsan 1
FSPF Unicast Routes
---------------------------
VSAN Number
-----------------------------------------------
1
1
1
1
20:01:00:05:30:00:51:1f
Role
------------- ------------
Downstream Disabled
Downstream Disabled
Upstream Disabled
------------- ------------
WWN
Dest Domain Route Cost
0x61(97) 500
0x62(98) 1000
0x63(99) 500
0x65(101) 1000
RCF-reject
Next hops
fc2/2
fc2/1
fc2/2
fc2/1
fc2/7
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
Configuring Interop Mode 1
315