Creating Fc Aliases - Cisco MDS 9000 Series Configuration Manual

Configuring and Managing Zones

Creating FC Aliases

To create an alias, follow these steps:
Step 1 switch# configure terminal
Enters configuration mode.
Step 2
switch(config)# fcalias name AliasSample vsan 3
Example:
switch(config-fcalias)#
Configures an alias name (AliasSample).
Step 3
switch(config-fcalias)# member type value
Example:
pWWN example:
Example:
switch(config-fcalias)#
Example:
fWWN example:
Example:
switch(config-fcalias)#
Example:
FC ID example:
Example:
switch(config-fcalias)#
Example:
Domain ID example:
Example:
switch(config-fcalias)#
Example:
IPv4 address example:
Example:
switch(config-fcalias)#
member pwwn 10:00:00:23:45:67:89:ab
member fwwn 10:01:10:01:10:ab:cd:ef
member fcid 0x222222
member domain-id 2 portnumber 23
member ip-address 10.15.0.0 255.255.0.0
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
Creating FC Aliases
69