Displaying Flow Statistics; Displaying Global Fspf Information - Cisco MDS 9000 Series Configuration Manual

Displaying Flow Statistics

Displaying Flow Statistics
Use the show fcflow stats commands to view flow statistics (see Example
for the Specified Module, on page 202
Displays Aggregated Flow Details for the Specified Module
switch# show fcflow stats aggregated module 6
Idx
---- ---- --------
1 800
Displays Flow Details for the Specified Module
switch# show fcflow stats module 6
Idx
---- -----
2
Displays Flow Index Usage for the Specified Module
switch# show fcflow stats usage module 6
Configured flows for module 6: 1-2

Displaying Global FSPF Information

Displays FSPF Information for a Specified VSAN, on page 202
VSAN:
• Domain number of the switch.
• Autonomous region for the switch.
• Min_LS_arrival: minimum time that must elapse before the switch accepts LSR updates.
• Min_LS_interval: minimum time that must elapse before the switch can transmit an LSR.
Tip
If the Min_LS_interval is higher than 10 seconds, the graceful shutdown feature is not implemented.
• LS_refresh_time: interval time lapse between refresh LSR transmissions.
• Max_age: maximum time aa LSR can stay before being deleted.
Displays FSPF Information for a Specified VSAN
switch# show fspf vsan 1
FSPF routing for VSAN 1
FSPF routing administration status is enabled
FSPF routing operational status is UP
It is an intra-domain router
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
202
VSAN frames bytes
-------
20185860 1211151600
VSAN DID SID Mask
------- ------
800 0x520400 0x530260
Configuring Fibre Channel Routing Services and Protocols
to Displays Flow Index Usage for the Specified Module, on page
frames bytes
----- -----
0xffffff 20337793 1220267580
displays global FSPF information for a specific
Displays Aggregated Flow Details
------
202).