Fdmi; Displaying Fdmi - Cisco MDS 9000 Series Configuration Manual

Managing FLOGI, Name Server, FDMI, and RSCN Databases
Displays the Name Server Statistics
switch# show fcns statistics
registration requests received = 27
deregistration requests received = 0
queries received = 57
queries sent = 10
reject responses sent = 14
RSCNs received = 0
RSCNs sent = 0

FDMI

Cisco MDS 9000 Family switches provide support for the Fabric-Device Management Interface (FDMI)
functionality, as described in the FC-GS-4 standard. FDMI enables management of devices such as Fibre
Channel host bus adapters (HBAs) through in-band communications. This addition complements the existing
Fibre Channel name server and management server functions.
Using the FDMI functionality, the Cisco NX-OS software can extract the following management information
about attached HBAs and host operating systems without installing proprietary host agents:
• Manufacturer, model, and serial number
• Node name and node symbolic name
• Hardware, driver, and firmware versions
• Host operating system (OS) name and version number
All FDMI entries are stored in persistent storage and are retrieved when the FDMI process is started.

Displaying FDMI

Use the show fdmi command to display the FDMI database information (see Examples
Management Servers, on page 219
Displays All HBA Management Servers
switch# show fdmi database
Registered HBA List for VSAN 1
10:00:00:00:c9:32:8d:77
21:01:00:e0:8b:2a:f6:54
switch# show fdmi database detail
Registered HBA List for VSAN 1
-------------------------------
HBA-ID: 10:00:00:00:c9:32:8d:77
-------------------------------
Node Name
Manufacturer
Serial Num
Model
Model Description:Emulex LightPulse LP9002 2 Gigabit PCI Fibre Channel Adapter
Hardware Ver
to Displays Details for the Specified HBA Entry, on page
:20:00:00:00:c9:32:8d:77
:Emulex Corporation
:0000c9328d77
:LP9002
:2002606D
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
FDMI
Displays All HBA
221).
219