Restoring Zones
Restoring Zones
To restore the full zone configuration using Fabric Manager, follow these steps:
Step 1
Choose Zone > Edit Local Full Zone Database. You see the Select VSAN dialog box.
Step 2
Select a VSAN and click OK. You see the Edit Local Full Zone Database dialog box for the selected VSAN (see
34: Edit Local Full Zone Database, on page
Figure 34: Edit Local Full Zone Database
Step 3
Choose File > Restore to restore a saved zone configuration using TFTP, SFTP, SCP or FTP. You see the Restore Zone
Configuration dialog box (see
Figure 35: Restore Zone Configuration Dialog Box
You can edit this configuration before restoring it to the switch.
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
84
84).
Figure 35: Restore Zone Configuration Dialog Box, on page
Configuring and Managing Zones
Figure
84).