Default Settings - Cisco MDS 9000 Series Configuration Manual

Configuring Fibre Channel Common Transport Management Security
Displays the Contents of the Fibre Channel Common Transport Query
switch# show fc-management database
--------------------------------------------------------------
VSAN PWWN FC-CT Permissions per FC services
--------------------------------------------------------------
1 01:01:01:01:01:01:01:01 Zone(RW), Unzoned-NS(RW), FCS(RW), FDMI(RW)
1 02:02:02:02:02:02:02:02 Zone(R), Unzoned-NS(R), FCS(R), FDMI(R)
1 03:03:03:03:03:03:03:03 Zone(W), Unzoned-NS(W), FCS(W), FDMI(W)
--------------------------------------------------------------
Total 3 entries
switch#
To verify the if the FC-management security feature is enabled or not, use the show fc-management
status command:
switch# show fc-management status
Mgmt Security Disabled
switch#

Default Settings

Table 28: Default FC Management Settings , on page 321
security feature in a Cisco MDS 9000 Family switch.
Table 28: Default FC Management Settings
Parameters
FC-management
Default
Disabled
Cisco MDS 9000 Series Fabric Configuration Guide, Release 8.x
lists the default settings for the FC management
Default Settings
321