Make the 12VDC power connector
The power connector type is 5.5x2.1mm Jack.
Cable Requirements
Network Cable: 10/100 Mbps Ethernet CAT
5/5E/6 UTP cables are applicable to the
ANSI/EIA/TIA-568A/B and ISO/D. Eight wires in
the network cable need to be inserted in parallel
into the top of the cable connector. The cable
connector needs to be crimped in position. When
the cable connector is in position, ensure that the
metal pieces of the cable connector are parallel to
each other and the clamp of the cable connector is
intact.
SDI Cable: For broadcast use, Belden1694A/5CFB
is a suitable cable to transmit broadcast-quality
video:
Conductor: